The System Control Program provides the following functions:

• Control of jetting, both for set up and during printing. Control of printing is either point-to-point (move-stop-print) or print-on-the-fly.
• Motion control, X-Y stages, Z stage, and other optional motion devices. Also controls the timing of printing.
• Print pattern generation (built-in and user-defined).
• Automated inspection of the printed pattern, when selecting the optional image analysis package.

The system control program is not available as a separate subsystem, but is an integral part of the jetlab™ system.

Print on the fly example, solder on 100 micron pads at 400/s:

Sample of user interface:

Return to selection guide.