In response to our customers’ requests for a low-cost tool to allow exploratory microdispensing investigations, MicroFab is pleased to offer the jetlab® 4. The newest member of our highly successful jetlab® family, currently in use in 23 countries worldwide, leans heavily on the successes of prior generations. By carefully considering the performance and budget requirements of laboratories exploring ink jet as a solution to their deposition challenges, jetlab® 4 provides a cost effective work station for research purposes.
Software controlled X-Y positioning; 160x120 mm2 substrate size & print area; manual Z axis control of printhead height; Print-on-the-Fly (both axes simultaneously) or Point-to-Point printing; raster & vector printing modes; arbitrary printing resolution and direction; complex print job definition through scripting; software based rotation correction; CCD camera for drop observation mounted at 15°, allowing drop impact visualization and coarse substrate alignment; manual pneumatics controls; JetDrive Drive Electronics unit with bipolar and arbitrary waveform modes, and single and burst modes.
CCD camera for substrate observation; heated workpiece holder and printheads; motorized Z-stage; drop and fiducial image analysis routines; electronic pressure control; HEPA filter & blower; 21x26 cm substrate size (4xl); improved positioning accuracy (4xl-A); integrated ultra-balance for calibration (4xl-B); computer controlled pressure/vacuum regulator.
Additional Information (PDF)