MJ-SF style drop-on-demand single jet dispensing devicesare suited for dispensing droplets of fluids such as adhesives, waxes, polymers and liquid metals at up to 250°C. An integrated orifice and wetted surfaces that are almost exclusively glass make MJ-SF devices extremely robust to aggressive materials, including solders. Orifice diameters of 20-80 um are available, allowing customers to optimize their process by selecting drop volumes with a two order of magnitude range. Fluids with viscosity less than 20 cp and surface tension in the range 20-500 dynes/cm can be dispensed.
Two fluid fitting styles are available: VCO and VCR. The VCO fitting is intended for use with the PH-04 and PH-05 high temperature printhead assemblies. The integrated orifice extends from the housing, allowing visualization of both internal flow and drop formation. Custom, application-specific configurations can also be developed.
High-temperature dispensing device with VCO fluid fitting, xxx denotes orifice diameter in microns. For PH-04 / PH-05 printheads.
High-temperature dispensing device with VCR fluid fitting, xxx denotes orifice diameter in microns.
High-temperature dispensing device with VCO fluid fitting, xxx denotes orifice diameter in microns. For PH-04a / PH-05a printheads.
Diamond-Like Carbon coating on front face of orifice.
Add –DLC designation to any MJ part number.
CT-M3-02: JetDrive™ III controller
CT-PT-21: Pressure / Thermal Controller
CT-PT-A1: Electronic Pressure Controller
CM-VS-03: Basic Optics System
Printhead Assemblies & Misc.: PH-04a, PH-05a, reservoirs, in-line filters; cleaning & retesting service
|Standard orifice diameters
|| 20-80 um, 5 um intervals
|Standard orifice diam. tolerance
|| ±1 um
|MJ-SF-01, MJ-SF-04 fitting
||Molex 50-57-9402; Molex 16-02-0097
|Standard wire length
|Printheads for MJ-SF-04
||< 20 cp
|Fluid surface tension
||alcohols, keytones, aliphatics, aromatics, dipolar solvents
|| nucleic acids, proteins, cells
||amino acids, lipids, biodegradable polymers
||fluxes, photoresists, epoxies, polyimides, electroactive polymers, cyanoacrylates, organometallics
||pigments, latex spheres, metal particles, Teflon, phosphors, ferrites, zeolyts
||sol-gels, thermoplastics, thermosets, acrylics, >1M salt solutions, photographic developer, fuels, aqueous
||* note: compatibility excludes O-rings
Drawings with dimensions
Equipment Selection Guide