Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9
Pressure & Temp. Control
Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/index.php on line 42
 :

Strict Standards: Non-static method JSite::getMenu() should not be called statically in /home2/microfab/public_html/templates/microfab/html/modules.php on line 40

Strict Standards: Non-static method JApplication::getMenu() should not be called statically in /home2/microfab/public_html/includes/application.php on line 536

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/html/modules.php on line 40

Pressure & Temp. Control

Pneumatics & Temperature Controllers

alt

Product Description

The pneumatics controller includes a three-state pneumatic circuit: pressure fill / purge; vacuum purge; and operating pressure control. A precision regulator is used to create the correct static pressure for drop-on-demand operation, regardless of the reservoir location and fluid level. The temperature controllers can be used to control printhead temperature(s) and substrate temperature(s). Configurations with up to four independent pressure control channels and up to four temperature controllers are available. Manual and electronic pressure control configurations are available.

Brochure (PDF)
CAD Views

Standard Features

  • Three-state pneumatic circuit; precision regulator, 2 mbar resolution
  • Digital pressure gauge
  • 1°C temperature resolution
  • Integrated into Jetlab® II and Jetlab® 4 family
alt

Available Options

  • Up to four independent pneumatic channels
  • Up to four temperature controllers
  • Electronic pressure regulator
  • Electronic pressure mode selection

Ordering Information

CT-PT-21
Pressure / Thermal Controller with one manual pneumatic channel: precision regulator and Pressure Mode Selector. No temperature controllers. Add up to two T-01 temperature controllers.

CT-PT-A1
alt Electronic Pressure Controller and Pressure Mode Selector, single channel. USB interface.

CT-PT-A2
Electronic Pressure Controller, manual Pressure Mode Selector, single channel. USB interface.

CT-PT4
Four channel Pressure / Thermal Controller, base unit (no pneumatics channels and no temperature controllers). Add up to four (4) CP-01 manual pneumatic channels and up to three (3) T-01 temperature controllers.

CP-01
Manual pneumatics control channel for CT-PT4 (precision regulator and Pressure Mode Selector).

alt CP-21
Pressure / vacuum pump for jetlab® Printing Systems and microdispensing subsystems.

T-ENCL-x
Enclosure for temperature controllers. Select from x=1-3. Includes power switches, fuses, power cord, and connectors for heaters and thermocouples.

T-01
Temperature controller for CT-PT-21, CT-PT-04, and T-ENCL-x.

Specifications

CT-PT-21 & -04, T-ENCL-x:
Pneumatics Circuit three state
      (1) Pressure fill / purge 0-15 psi (0-100 kPa)
(2) Vacuum purge
      (3) Operating pressure MINSTAC, 0.138-40 UNF 2A, 5 turns
Pressure gauges digital, resolution:
0.1 psi, 0.2 kPa, 2 mbar, 0.1 in Hg, 2 mm Hg
Input pressure 60 psig (420 kPa)
Input flow, max 20 scfm (560 L/min)
Input vacuum < -20” Hg (-70 kPa)
Temperature control Increments of 1°C
Heater connector 4 pin AMP, round
Thermocouple connector Omega mini
Pneumatic connectors 1/8” (32 mm) quick connects
Power 110V or 220V (set internal)
CP-PT-21 Size (H x W x D) 7.1 x 7.1 x 10.1 in
18 x 18 x 20.2 cm
CP-PT-04 Size (H x W x D) 18 x 11.9 x 12 in
45.7 x 30.2 x 30.5
CP-PT-A1 & -A2 Size
(H x W x D)
7.1 x 7.1 x 10.1 in
18 x 18 x 20.2 cm
T-ENCL-x Size (H x W x D) 5.1 x 6 x 6 in
13 X 15.2 x 15.2 cm
CP-21:
Power 110V or 220V models
Output pressure 60 psig (420 kPa
Output flow 1.1 cfm (31.2 L/min)
Output vacuum 25.5” Hg at zero flow