Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/rt_styleswitcher.php on line 9
News
Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/index.php on line 42
 :

Strict Standards: Non-static method JSite::getMenu() should not be called statically in /home2/microfab/public_html/templates/microfab/html/modules.php on line 40

Strict Standards: Non-static method JApplication::getMenu() should not be called statically in /home2/microfab/public_html/includes/application.php on line 536

Strict Standards: Only variables should be assigned by reference in /home2/microfab/public_html/templates/microfab/html/modules.php on line 40

jetlab® 4 in operation at University of Sheffield

Click on the link below to watch a video of jetlab® 4 in operation at Center for Advanced Additive Manufacturing at University of Sheffield in UK.

Video Link:www.youtube.com/watch?v=tagP1XhWPI8

Survivability of ink-jet encapsulated cells for Tissue Engineering

alt MicroFab, in ongoing collaboration with Wake Forest Institute of Regenerative Medicine (WFIRM), demonstrated 7-day survival post printing & encapsulation. These experiments used a custom ink-jet Bioprinter built by MicroFab and installed at WFIRM.

Read More »

September 2014

MicroFab printers used for ultra-sensitive detector calibration

alt

This year, MicroFab has shipped and installed jetlab® 4 XL-B Printing Systems in four countries worldwide. These systems have an integrated ultra-microbalance under Printing System control, allowing rapid and low-cost creation of precision calibration standards of the material of interest. Standards for ultra-low level detection explosives, narcotics, and other substances have been produced, and used to calibrate and develop detection equipment.

July 2013

MicroFab equipment featured in TED talk on 3D printing for tissue engineering

alt Click on the link below to watch the video of the TEDxMIDWEST talk by Dr. Ben Harrison with Wake Forest Institute for Regenerative Medicine on tissue engineering.

Video Link: https://www.youtube.com/watch?v=ElWzoeUVDso

March 2014

Curvilinear Printing in 3D

alt

Beginning with shipments in July 2013, MicroFab has added on all new jetlab print stations the capability to print curved lines on the fly and to have synchronized vertical motion of the print head at the same time. This feature allows structures like conductive spirals to be used as antennae or kink-free conductive traces for circuitry to be printed efficiently and with a constant line width, which traditional raster scans cannot maintain. The seamlessly synchronized vertical head motion enables printing onto structured surfaces. Recently installed systems are eligible for a free control software and motion firmware upgrade.

August 2013